Kiln transmission products professional service provider, to create a well-known brand of kiln transmission
Building a well-known brand for kiln transmission
Consulting hotline: +86-0757-87655008 / +86-18007133141 (Mr.Guan)
Professional service provider for kiln transmission products
Consulting hotline: +86-0757-87655008 / +86-18007133141 (Mr.Guan)
17
2023
-
04
How to clean and maintain non-standard chains in daily life
How to clean and maintain non-standard chains in daily life mainly starts from the following points:
1. Do not use strong acid or alkaline cleaning agents (such as rust removers), as these chemicals can cause chain damage or even breakage.
2. Do not use a chain washing machine with added solvents to clean the chain, as this cleaning method will definitely damage the chain.
3. Avoid using organic solvents such as degreasing oil, as this not only damages the environment but also washes out the lubricating oil from the bearing area.
4. Clean your chain after each ride, especially in rainy and humid environments.
5. Be sure to use a dry cloth to wipe the chain and its accessories.
If necessary, use an old toothbrush to clean the gaps between the chain pieces.
7. Also, don't forget to clean the front transmission and rear transmission guide wheel.
8. Use a brush to remove the accumulated sediment and dirt between the chains, and if necessary, use warm soapy water to assist.
07
/
04
Related News
Precise Transmission, Enduring Protection: High-Performance Gearbox for Ceramic Kilns
Ceramic kilns are core equipment for producing high-quality ceramic products. The stability, reliability, and durability of their transmission systems directly affect production efficiency and product quality. Therefore, we at Sainader have tailor-made a "high-performance transmission gearbox" for ceramic kilns, driving the kiln to operate smoothly and efficiently with precision quality.
04
/
17
Related News
Vibration Diagnosis and Case Analysis of Gear Faults
The obvious impact peak appears in the time-domain waveform, indicating that there may be local defects in the gear. The spectrum shows the gear meshing frequency and double harmonic frequency, with rich edge frequencies. From Figure 3, it can be seen that the edge frequency is the rotor power frequency, indicating that the vibration amplitude of the meshing frequency is modulated by the rotor power frequency impact vibration.
04
/
17
Related News
Carburization Quenching Process and Deformation Analysis of Bevel Gears
The material of the bevel gear is SNC815 carburized steel, and its chemical composition is shown in Table 1. The parameters of the bevel gear used for analysis are shown in Table 2. Considering computational efficiency and economy, the workpiece was simplified during the analysis. One tooth of the bevel gear was simulated and the contact surface between the tooth and the other teeth was used as the symmetry surface. When dividing a single tooth model into tetrahedral grids, set the number of grids to 60000.
04
/
17
Related News
Small gears create a spark of scientific and technological innovation
This seminar will exchange and discuss issues of concern to enterprises from the perspectives of industry trends, technology applications, etc., gather the resource advantages of government, industry, academia, and research, and promote the sustainable development of the Yuhuan gear industry chain.
Dedicated to providing high-quality products and timely and thoughtful services to our customers
Contact information
Mobile phone: +86-18007133141 (Mr.Guan)
Address: Jingang Avenue (opposite Baini Station), Baini Town, Sanshui District, Foshan City, Guangdong Province
Copyright © Guangdong Seine DE intelligent equipment co.,LTD.
Keywords: Roller kiln drive, complete transmission of architectural ceramic roller kiln, complete transmission of foam ceramic roller kiln
